Visit Winmate.com.cn   |   文件下载专区
 

车载/叉车

安全及标准
 
 
MIL-STD810G
 

MIL-STD-810G测试标准是得到美国国防部所有部门认可的认证标准。MIL-STD-810G认证范围广泛的测条件,包括:高空低压力测试;暴露在高、低温度和温度变化(操作和存储);防水(包括风吹和冻雨);湿度,霉菌,盐雾腐蚀试验;砂尘;爆炸性气体;泄漏;加速度;冲击和运输的冲击;规律振动和随机振动。本标准描述了环境管理和工程流程,为使用者对产品带来环境适应性和系统设计的整体耐久性的可靠信心。

 
MIL-STD-810G Method 501.4 高温
MIL-STD-810G Method 502.4 低温
MIL-STD-810G Method 506.4 防雨/水
MIL-STD-810G Method 507.4 湿度
MIL-STD-810G Method 514.5 振动
MIL-STD-810G Method 516.5 冲击
MIL-STD-810G Method 503.4 温度变化
MIL-STD-810G Method 500.4 低气压
 
MIL-STD461E/F
 

MIL-STD-461是美国军用标准,是如何进行电磁兼容测试设备的规范。

具体而言,MIL-STD 461f细节测试规范确保传导发射(CE)、传导敏感度(CS)、辐射发射(RE)、和辐射敏感度(RS)的系统能满足电磁干扰的控制要求。


 
MIL-STD-461 Method - CE101/ CE102 Conducted Emissions
MIL-STD-461 Method - CS101/CS106/CS109/CS114/CS115/CS116 Conducted Susceptibility
MIL-STD-461 Method - RS101/RS103 Radiated Susceptibility
MIL-STD-461 Method - RE101/RE102 Radiated Emissions
 
IEC 60068-2-27
 
 
EN50155

EN50155认证是适用于铁路车辆和相关铁路应用电子设备测试的设计指南规范。满足铁路要求的设备必须经过一系列严格的测试,包括电磁兼容,冷却,湿热,盐雾,振动,冲击试验,以通过EN50155认证。

 
     Type Standard/Regulation
Cooling EN50155:2001 / 10.2.3
EN60068-2-1, Test Ad
Dry Heat (operation) EN50155:2001/ 10.2.4
EN60068-2-2, test Bd
Damp heat test, cyclic EN50155:2001 / 10.2.5
EN60068-2-30, Test Db
Salt Mist Test EN50155:2001 / 10.2.10
Vibration Test EN50155:2001/10.2.11
EN61373 / IEC61373 / Section 8 ,Section 9
Shock Test EN50155:2001/10.2.11
EN61373 / IEC61373 / Section 10
Low temp. storage test EN50155:2001/10.2.14
EN60068-2-1
Watertightness Test EN50155:2001/10.2.12
EN60529
(IEC 60529)
 
 
IEC 61373
 

This International Standard specifies the requirements for testing equipment for railway vehicles which are subjected to vibrations and shock. To ensure the operation of the equipments, it has to withstand tests of reasonable duration to simulate the service condition throughout its expected life.

Simulated long-life testing is achieved by amplification, where amplitudes are increased and the time base decreased.

Test carried out on Winmate Equipment using test values for Category 1 Body Mounted, Class B, which is defined as anything mounted inside an equipment case which is turn mounted directly on or under the car body.

 
 
 
Visit Winmate.com.cn   |   Contact us
Copyright © 1996-2016 WinMate Inc. All Rights Reserved.